Mandrel bending machine 40139 3A CNC    

 

Capacity:

– Round tubing mild steel 140 x 6,0 mm Ø
– Round tubing stainless steel 140 x 4,0 mm Ø
– Square tubing mild steel on request
– Max. moment of resistance 81,2 cm³
– Bending angle up to 180° + 10° spring back
– Bending speed 10°/sec. (front feed)
– Speed of front feed 300 mm/sec.
– Speed of rotation 40°/sec.
– Accuracy of the bending axis +/-0,2°
– Accuracy of the length +/-0,5 mm
– Accuracy of the rotation +/-0,2°
– Arbor length/Usable length 6096 mm
– Radii max. 350 mm
– Bending height 1250 mm
– Power bending axis electro-hydraulic
– Automatic positioning of the rotation and length servo-electric
– All other axes (e.g. clamping, mandrel forwards/backwards, etc.) electro-hydraulic

 

Machine equipment-/basic accessories:  

–  Bending direction clockwise
– With  hollow shaft for using tooling for small radii
– Include wide opening pressure die, to allow the off set bend device with the long neck clamping to move directly behind the bending tool
– Following pressure die with linear slide bearing
– 850 mm following and a constant support of 200 mm
– Forward movement via pressure control valve
– Returned by hydraulic cylinder
– Attention: For each tube-Ø you need a separate collet
– For a correct positioning of the mandrel the machine is equipped with a mandrel support
– the machine is conform to the electric and mechanical security guidelines and  the CE norm
– The emergency area in front of the machine is controlled via scanner
– Starting of operation via hand button
– Manual operation
Each function clamping on/off, mandrel forward/back, bending on/off initiated by selection and pressing of respective button (for proto type and sample production)
– With automatic operation sequence
– Injection by hand button or automatic in the bending operation clamping
– Incorporating switch key to provide a choice of operation
– Standard-norm-hydraulic components
– Incl. stairs and balustrade at the beginning and the end of the machine for an easy walk through the machine ground frame during tool changing
– Machine stationary
– Colour RAL 3020 red, 7047 grey

 

Machine data:  

– Including connection for pressured air supply, 6 bar
– Nominal pressure 250 bar, Operating pressure 200 bar
– Operating voltage 400 Volt – 50 Cyl. – 3 Ph. – 40 kW
– Control voltage 24 V D.C.
– Length  8900 mm
– Width   2600 mm
– Height  1700 mm
– Weight approx. 17.000 kg
– Control desk approx. 200 kg

 

Control description:  

– Fitted with 3-axis control of the bending angle, the rotation axis and the longitudinal movement in the different planes
– The bending axis, the rotation axis and the length axis are coupled with each other, it ensues a permanent actual and nominal comparison also the control checks the tolerance and actuates further operations
– Integrated computer – IBM-compatible, current technology
– It ensues a permanent actual and nominal comparisation on the screen
– User surface Windows
– Separate control element including Tozchpanel for setup and start of automatic cycle

 

Standard equipment CNC control:    

– With max. 20 different positions of each tube, all positions are controlled in the PC program
– Possibility to store 1 Mio. tubes with 20 positions each under drg. numbers
– After input you can store the tube
– Storage of the drg. numbers according to WIN Standard
– The off set bend device moves to the front position for an easy input and output of the tubes

 

DB401393ACNC