Reliable solution for automated lines

CC26 comes in both a table-top or ergonomic Z-configuration. The CC26 is built for high-volume Serial Production use. By design, the constant centerline crimping enables easy part-positioning.

The Z-configuration, with the crimping head and hydraulic unit all separate, makes the CC26 ideal for automatic line use. For automation it can be equipped with an optional Automatic Greasing Unit, enabling an interruption-free operation combined with long maintenance intervals and ensuring ultimate accuracy. It also has wiper seal, protecting dirt and debris from entering the cylinder.

  • Control
  • ICC
  • Models
  • Standard
  • Z-model
  • Standard features
  • Electric backstop device
  • Options
  • QuickChange-tool
  • Foot pedal
  • Mechanical back stop device
  • Pressure crimping ICC1
  • Step crimping ICC2
  • Quality control ICC3
  • Graphical quality control ICC4
  • Auto greasing G3
  • Interface pack ETH (Communication TCP/IP & UDP)
  • Bar Code Reader BCR


Technical data
Max crimping dia (mm) 1 61
Max crimping dia (inch) 1 2.40
Max crimping force (kN) 1300
Max crimping force (tonnage) 130
Cycle time 10 mm (s) 2 2.8
Hose size ID (inch) 11/4
Die set series 20
Max opening (mm) 3 +30
Max opening without dies (mm) 114
Master die D/L (mm) 84/80
Master die D/L (inch) 3.31/3.15
Motor Power (kW/HP) 4/5.5
Oil tank volume 35 L/32L (Z-model)
Dimensions (LxWxH)
Machine (mm) CC26 647x588x745
Machine (inch) CC26 23.6×23.1×29.3
Crimping head (mm) CC26Z 326x608x341
Hydraulic Unit (mm) CC26Z 597×436.5×653
Crimping head (inch) CC26Z 12.8×23.9×13.4
Hydrauilic Unit (inch) CC26Z 23.5×17.2×25.7
Weight (KG/LBS)


1) With standard dies. Crimping range can be increased with special dies.
2) Theoretical with 10 mm cycle.
3) Maximum opening is the total die travel. Add this value to the minimum crimping diameter of the

die set used. The result is the maximum opening of the machine with die set in place.