Mandrel bending machine 630 3A CNC

 

Capacity:

– Round tubing mild steel 30 x 2,0 mm Ø
– Round tubing stainless steel 30 x 1,5 mm Ø
– Square tubing mild steel 20 x 2,5 mm
– Max. moment of resistance 1,18 cm³
– Bending angle up to 180° + 10° spring back
– Bending speed 65°/ Sec.
– Speed of front feed 400 mm/sec.
– Speed of rotation 90°/sec.
– Accuracy of the bending axis +/-0,2°
– Accuracy of the length +/-0,1 mm
– Accuracy of the rotation +/-0,1°
– Arbor length/Usable length 3048 mm
– Radii max. 85 mm
– Bending height 1050 mm
– Power bending axis electro-hydraulic
– Automatic positioning of the rotation and length servo-electric
– All other axes (e.g. clamping, mandrel forwards/backwards, etc.) electro-hydraulic

 

Machine equipment-/basic accessories:    

– Compact, exposed bending head
– Bending direction clockwise
– With hollow shaft for using tooling for small radii
– Include wide opening pressure die, to allow the off set bend device with the long neck clamping to move directly behind the bending tool
Attention: For each tube-Ø you need a separate collet
– For a correct positioning of the mandrel the machine is equipped with a mandrel support
– the machine is conform to the electric and mechanical security guidelines and  the CE norm
– The emergency area in front of the machine is controlled via scanner
– Starting of operation via hand button
– With automatic tool resetting
– Manual operation
Each function clamping on/off, mandrel forward/back, bending on/off initiated by selection and pressing of respective button (for proto type and sample production)
– Standard-norm-hydraulic components
– Machine stationary
– Colour RAL 3020 red, 7047 grey

 

Machine data:    

– Including connection for external pressured air supply, 6 bar
– Nominal pressure 250 bar, Operating pressure 150 bar
– Operating voltage 400 Volt – 50 Cyl. – 3 Ph. 22 KW
– control voltage: 24 VDC
– Capacity of the hydraulic tank 70 Ltr.
– Length  4700 mm
– Width   1400 mm
– Height  1500 mm
– Weight approx. 2400 kg + control panel 200 kg

 

Control description:  

– Fitted with 3-axis control of the bending angle, the rotation axis and the longitudinal movement in the different planes
– The bending axis, the rotation axis and the length axis are coupled with each other, it ensues a permanent actual and nominal comparison also the control checks the tolerance and actuates further operations
– Integrated computer – IBM-compatible, current technology
– It ensues a permanent actual and nominal comparisation on the screen
– User surface Windows
– Separate control element including Tozchpanel for setup and start of automatic cycle

 

Standard equipment CNC control: 

– With max. 20 different positions of each tube, all positions are controlled in the PC program
– Possibility to store 1 Mio. tubes with 20 positions each under drg. numbers
– After input you can store the tube
– Storage of the drg. numbers according to WIN Standard
– If the control registrates a breakwown or faults, you can see in the screen via text
– The off set bend device moves to the front position for an easy input and output of the tubes

 

DB6303ACNC