Finn-Power NC-machines have proven to be the most reliable and widely used nut crimping machines in the industry. NC-machines provide fast and accurate crimping for fitting manufacturing.

With 93 ton force and 140mm master dies NC40 is the second biggest NC-machine in the range. NC40 can be used also for other applications with short crimping length eg. connectors, small hoses, rings, tubes and sensors.

Adjustable backstop enables quick set up for different products.
A special centering pin, selected according to ferrule size, can be used during the crimping.

Also available as Z-model with separate crimping head and hydraulic unit.

Control

  • ICC

Standard Features

  • Foot pedal (Standard)
  • Mechanical back stop device

Options

  • Foot pedal (Z-model)
  • Auto greasing G3
  • Oil cooler **
  • ** Will have impact on motor size,
    hydraulic unit dimensions and weight

Options (ICC)

  • Pressure crimping ICC1
  • Step crimping ICC2
  • Quality control ICC3
  • Graphical quality control ICC4
  • Remote control unit
  • Interface pack ETH (Communication TCP/IP & UDP)
  • Bar Code Reader BCR
Technical Data
Crimping range (mm) 1 12 – 105
Crimping range (inch) 1 0.47-4.13
Max. crimping force (kN) 930
Max. crimping force (tonnage) 93
Cycle time 10mm (s) 2 1.9
Hose size ID (inch) 2
Die set series NC20/30/40
Max opening (mm) 3 +26
Max. opening without dies (mm) 166
Master die D/L (mm) 140/37
Master die D/L (inch) 3.90/1.46
Motor Power (kW/HP) 4.0/5.5
Oil tank volume 50 L
Z-model availability YES
Dimensions (LxWxH)
Standard (mm) 835x885x997
Standard (inch) 32.9×34.8×39.3
Z-model head (mm) 406x372x395
Z-model hydraulic unit (mm) 653x473x711
Z-model head (inch) 15.9×14.6×15.6
Z-model hydraulic unit (inch) 25.7×18.6×27.9
Weight (KG/LBS)
Standard 288/529
Z-model head 129/284
Z-model hydraulic unit 96/211

 

  1. With standard dies. Crimping range can be increased with special dies.
  2. Theoretical with 10mm cycle.
  3. Maximum opening is the total die travel. Add this value to the minimum crimping diameter of the die set used. The result is the maximum opening of the machine with die set in place.