Finn-Power P20X and P32X crimping machines are cost-effective alternatives for single-piece production. With the same significant advantages than the other Finn-Power P-models (precision, durability, force and ease of use), P20X and P32X -models are totally unmatched in their own class.

Model P32X
Crimping range (mm) 1 10 – 87
Crimping range (inches) 1 0.39 – 3.42
Crimping force (kN) 2000
Crimping force (tonnage) 200
Crimpings / hour 2 230
Hose size (inches) 2
Die set 3
P32
Max. opening (mm) 4 33
Master die D / L (mm) 99 / 80
Master die D / L (inches) 3.90 / 3.15
Control
MS
Motor (kW) 1.5 / 2.2 6
Motor (HP) 2.0 / 3.0 6
QC tool 14
O
Pedal 15
—
Control unit: integrated
X
Control unit: C1
—
Control unit: C2
—
Back stop device: mechanic
O
Back stop device: electric 15
—
Mirror
—
UC1 17 —
UC2 17 —
UC3 17 —
Auto greasing G3 16
—
Remotic control unit
—
Counter 18 —
ASCII signal —
Length (mm) 632
Width (mm) 521
Height (mm) 567
Length (inches) 24.9
Width (inches) 20.6
Height (inches) 22.4
Weight (kg) 150
Weight (lbs) 331

 

X = standard
O = optional
— = not available

1. With standard dies. Crimping range can be increased with special dies.
2. Theoretical with ½ hose, diameter 10 mm.
3. See table for die set data.
4. Maximum opening is the total die travel. Add this value to the minimum crimping diameter of the die set used. The result is the maximum opening of the machine with die set in place.
5. 12V / 24V. Overload controlled.
6. 1-phase / 3-phase.
7. FP140 dies can be used without adapter dies.
8. Hydraulic hose / industrial hose.
9. With adapter dies.
10. Hose cutter.
11. Full cycle.
12. Die travel / feeding channel.
13. NC20, NC30 and NC40 dies can be used.
14. Available for P20, P32 and CC22 dies.
15. Not available in MS control.
16. Technical implementation varies depending on the machine model. Please verify the suitability of the option from your distributor.
17. Available in UC models only.
18. Standard feature in UC models, includes ascending/descending counter.

18506_p3277qW