Finn-Power SP-series crimping machines with open C-frame structure are optimal for crimping any odd shape, bent or otherwise complex hose assemblies.

SP2000 with 200 ton force is designed for heavier bent hose assemblies and small tubular components with large flanges.

SP2000 also available in following configurations:
– S-model with enhanced cycle time
– D-model with double head configuration

See details from specific product cards.

Control

  • ICC (7″ touchscreen)

Standard features

  • Quick Change-tool
  • Foot pedal (Standard and S-model)

Options

  • Foot pedal (Z-model)
  • Auto greasing G3
  • Remote control (R1, R2)
  • Pressure crimping ICC1
  • Step crimping ICC2
  • Quality control ICC3
  • Graphical quality control ICC4
  • Interface pack ETH (Communication TCP/IP & UDP)
  • A3 signal (cable not included)
  • Bar Code Reader BCR
  • Auto greasing G3
  • ICC 12″ display
Technical data
Crimping range (mm) 1) 10–54
Crimping range (inch) 1) 0.39-2.12
Max. crimping force (kN) 2000
Max. crimping force (tonnage) 200
Cycle time 10 mm (s) 2) 2.4
Hose size ID (inch) 11/4
Die set series 3) 20
Max. opening (mm) 4) +25/+63
Master die D/L (mm) 84/78
Master die D/L (inch) 1.81/3.0
Motor Power (kW/HP) 5.5/7.5
Oil tank volume 135 L
Dimensions (LxWxH)
Machine (mm) 1062x970x2004
Hydraulic Unit (mm) 713x705x1060
Machine (inch) 59.4×37.4×88.6
Hydraulic Unit (inch) 28.0×27.8×41.7
Weight (KG/LBS)
Machine 1940/3936
Hydraulic Unit 182/402

 

1) With standard dies. Crimping range can be increased with special dies.
2) Theoretical with 10mm cycle.
3) See table for die set data.
4) Maximum opening is the total die travel. Add this value to the minimum crimping diameter of the die set used. The result is the maximum opening of the machine with die set in place.